Distribution Network Performance Enhancement Through Optimal Sizing and Placement of D-STATCOM using Particle Swarm Optimization Technique (case study-Woldya Distribution Network)

Authors: , ,

Abstract: This article presents the use of distribution static synchronous compensator (D-STATCOM) to improve distribution network performance by maintaining voltage profile, stability and reducing power losses. The study was conducted on a 7.2 MW Gonder ber feeder, which had an unacceptable voltage profile and high active and reactive power losses. Two methods were applied to assign the power control variables: bus-based voltage stability index analysis and particle swarm optimization (PSO). The optimal allocation was tested in different system cases. The results showed that a single installation of D-STATCOM improved system performance; with an improved voltage profile between 0.95 and 1.05p.u, increased voltage stability indices and reduced active and reactive power losses. Cost analysis of the proposed compensation scheme indicated a payback period of 1.8 years.

Engineering World, E-ISSN: 2692-5079, Volume 6, 2024, Art. #29

PDF
DOI
XML
Cite
×
Citation Tools
WSEAS AMA
Esubalew Fikru Getahun, Asefa Sisay Yimer, Wondwossen Astatike Haile, "Distribution Network Performance Enhancement Through Optimal Sizing and Placement of D-STATCOM using Particle Swarm Optimization Technique (case study-Woldya Distribution Network)," Engineering World, vol. 6, pp. 264-276, 2024, DOI:10.37394/232025.2024.6.29
Esubalew Fikru Getahun, Asefa Sisay Yimer, Wondwossen Astatike Haile. Distribution Network Performance Enhancement Through Optimal Sizing and Placement of D-STATCOM using Particle Swarm Optimization Technique (case study-Woldya Distribution Network). Engineering World. 2024;6:264-276. 10.37394/232025.2024.6.29
Copy to Clipboard
Citation copied to Clipboard

Certification

---