Bohumil Brtník, "Fully Graph Sensitivity Solution of the Switched Circuits by Two-graph," WSEAS Transactions on Circuits and Systems, vol. 20, pp. 252-256, 2021, DOI:10.37394/23201.2021.20.28
Bohumil Brtník. Fully Graph Sensitivity Solution of the Switched Circuits by Two-graph.
WSEAS Transactions on Circuits and Systems. 2021;20:252-256. 10.37394/23201.2021.20.28
WSEAS Transactions on Circuits and Systems
Print ISSN: 1109-2734, E-ISSN: 2224-266X
Volume 20, 2021
Fully Graph Sensitivity Solution of the Switched Circuits by Two-graph
Author:
Abstract: The most general parameter of the electronic circuit is its sensitivity. Sensitivity analysis helps circuit designers to determine boundaries to predict the variations that a particular design variable will generate in a target specifications, if it differs from what is previously assumed. There are two basic methods for calculating the sensitivity: matrix methods and graph methods. The method described in this article is based on a graph, that contains separate input ad output nodes for each phase. This makes it possible to determine the transmission sensitivity even between partial switching phases. The described fully-graph method is suitable for switched current circuits and switched capacitors circuits, too
Pages: 252-256 WSEAS Transactions on Circuits and Systems, ISSN / E-ISSN: 1109-2734 / 2224-266X, Volume 20, 2021, Art. #28 DOI: 10.37394/23201.2021.20.28
×
Citation Tools