International Journal of Applied Sciences & Development
E-ISSN: 2945-0454
Volume 5, 2026
The Reuse of High-Density Polyethylene (HDPE) Plastic Wastes and their Usage with Cerium Dioxide (CeO2) as New Polymer Nanocomposites
Authors: ,
Search Articles
Abstract: A high density polyethylene (HDPE) plastic was reused and it was used together with cerium dioxide (CeO2) to photodegrade the Roxarsone (ROX, 4-hydroxy-3-nitrophenylarsonic acid). The microstructure of the HPDE/CeO2 polymer nanocomposite was characterized by scanning electron microscopy (SEM) analysis, energy In the sunlight power (20-100 W/m2), photooxidation time (10 – 100 min), pH (2-10), temperature (10oC-40oC), HDPE nanocomposites (NCs) concentrations (100-1600 mg/l), CeO2 concentrations (2.5-18 mg/l) and the ratios of HDPE to CeO2 (37.5-100), HDPE/CeO2 NCs concentration (200-2400 mg/l) on the photodegradation yields of ROX was investigated. The surface properties of the HDPE/CeO2 NCs was investigated by the XRD, SEM and FTIR analysis. For maximum photodegradation yields of ROX (99%) the optimum operational conditions were 60 W/m2 sunlight power, pH=4.0, 40oC, at 8 mg/l CeO2 nanoparticles (NPs), at 300 mg/l HDPE concentration, at a HDPE TO CeO2 ratio of 37.5, at 800 mg/l ROX concentration, after 30 min photodegradation duration, respectively. ROX was photodegraded according to Hinshelwood Kinetic with a reaction kinetic constant of k = 12.349 x 10-4 min-1. EDS analysis showed that Ce and O were distributed on the surface and CeO2 particles existed in the HDPE matrix. According to SEM analyses the aging treatment increased the adhesive wear level on the HDPE/CeO2 NCs by leading to the increase of coefficients of friction (COF). XRD results showed that the characteristic peaks of the HDPE without aging were higher, and the height of the characteristic peak decreased after aging treatment. Therefore, the crystallinity of HDPE decreased, and showed that the fracture of internal molecular chain increased after aging treatment.
Keywords:
Cerium dioxide (CeO2), High-density polyethylene (HDPE), 4-Hydroxy-3-nitrophenylarsonic acid, Nanocomposites, Recycling, Reuse, Roxarsone (ROX), Photodegradation, Plastic Wastes, Polymer
Pages: 220-264
DOI: 10.37394/232029.2026.5.23