WSEAS Transactions on Advances in Engineering Education
Print ISSN: 1790-1979, E-ISSN: 2224-3410
Volume 21, 2024
Numerical Investigation of Nanofluid’s Heat Transfer Performance in Passive Residual Heat Removing System of AP1000 Nuclear Reactor
Authors: Mantasha Ponkty, Anamika Puja, Abdus Sattar Mollah
Abstract: The Passive Heat Removal system (PHRS) is designed to remove the residual heat from the core in case of a station blackout, failure of emergency core cooling system, or failure of feedwater supply through the Passive Residual Heat Removal Heat Exchanger (PRHR HX). PRHR HX consists of a C-shaped tube bundle as a heat exchanger and the In-Containment Refueling Water Storage Tank (IRWST) as a heat sink. A temperature distribution of this passive heat removal system of an AP1000 Reactor is generated using COMSOL Multiphysics and the heat transfer coefficient is calculated to illustrate the effectiveness of the PHRS. A comparison of the heat transfer coefficient between the IRWST filled with water and nanofluid has been generated using the PRHR HX design. Thermophysical properties of nanofluids have been calculated in the process of calculating the heat transfer coefficient. Numerical results show the difference in temperature reduction of $$Al_{2}O_{3}$$, $$ TiO_{2}$$, and Ag as opposed to water in the IRWST. Time-dependent heat conduction of water and nanofluid results contribute to the effective analysis of passive heat removal systems and provide information for the safe operation of AP1000 reactors. By the end of 2024/2025, two VVER-1200 power stations with a combined capacity of 2400 MW will be operating in Bangladesh. For safety and licensing reasons, heat transfer simulation of VVER-1200 can be performed using COMSOL software.
Search Articles
Pages: 80-91
DOI: 10.37394/232010.2024.21.11
WSEAS Transactions on Advances in Engineering Education, ISSN / E-ISSN: 1790-1979 / 2224-3410, Volume 21, 2024, Art. #11