International Journal of Applied Sciences & Development
E-ISSN: 2945-0454
Volume 3, 2024
Analytical and Experimental Research for Development of the Airless Tires for Urban Micromobility Means
Authors: , ,
Abstract: It is currently recognized that electric vehicles are the optimal type of passenger transport for urban usage. However, there are very few people willing to buy them, since today electric cars are very expensive. So the development of the personal light electric transport segment (electric bicycles, scooters, motorcycles, etc.) becomes very relevant. At the same time, the introduction of new technologies (in particular, 3D printing) and constructions (airless wheels) for their mass production is of particular importance.
The range of problems that can be solved by modern additive technologies is expanding every day. FDM technology is one of the most commonly used additive methods. It is not only widely available, but it also provides significant possibilities for decision-making. However, most developments in this area are focused on obtaining the geometric accuracy of shapes without taking into account the mechanical properties of materials used. Therefore, the purpose of this study is to investigate experimentally the influence of filling density of parts manufactured by 3D printing on their mechanical properties and application of obtained results for the production of airless tires by using FDM technology.
Search Articles
Pages: 57-73
DOI: 10.37394/232029.2024.3.5