WSEAS Transactions on Circuits and Systems
Print ISSN: 1109-2734, E-ISSN: 2224-266X
Volume 19, 2020
Hybrid Control for Power System Based on STATCOM and UPFC with Two 3-level 48-pulse under Different Conditions
Author:
Abstract: This research presents the proposed model, to control the power flow in the transmission power system by applying Unified Power Flow Controller (UPFC), STATCOM and two 3-level 48-puls converter. This hybrid has been used to improve performance and reduce the maximum over shoot which is obtained from proposed model when the fault is occurring or suddenly system changes. The behavior of the system is analyzed under different three cases. The first case, the model is applied to plus load at bus 3. The second case, the model is operating at normal work and the third case, the three phase fault is occurred at bus4. In this research, the performance of system is studied under applied all cases of the current, voltage and power for the system. The numerical results of the proposed model are introduced to show the maximum over shoot and RMS values after applied proposed control at three different cases to prove the suggested model gave a good performance especially, during three phases fault and after fault clearance
Search Articles
Pages: 277-288
DOI: 10.37394/23201.2020.19.30